Sunstone Linear DC Resistance Welder: LDC6000-A
Request a quote
Need Training on This Product? Book now at this link here.
Sunstone Circle Protection Plan
The best protection your investment has ever seen! Learn More
Need Training on This Product? Book now at this link here.
Sunstone Circle Protection Plan
The best protection your investment has ever seen! Learn More
New · Linear DC resistance welding · LDC6000-A
Precise, repeatable micro welds with closed-loop control on every pulse.
The Sunstone Linear DC measures weld output and adjusts it in real time as part resistance changes. It delivers 5 to 6,000 A, with weld monitoring and PLC control built into every unit.
Pair it with a compatible Sunstone weld head for delicate components, battery tabs, fine wire, electronics, medical devices, and automated production.
Get a Free Micro Weld EvaluationLinear DC resistance welding passes tightly regulated direct current through metal parts held under electrode force. Resistance at the contact point creates heat that joins the parts. A transistor-regulated output stage shapes the current smoothly, while closed-loop feedback adjusts output during the weld.
That control is useful when parts are small or sensitive to heat. Operators can set the weld mode, pulse duration, upslope, and downslope to develop a repeatable process for fine wire, thin foils, battery tabs, sensor leads, and other precision components.
Send Sunstone your samples for a free micro weld evaluation.
Request an evaluationChoose the output control that fits your materials, geometry, and process requirements.
| Mode | How it works |
|---|---|
| Constant current | Regulates current through the parts during the weld. |
| Constant voltage | Regulates voltage across the electrodes during the weld. |
| Constant power | Regulates delivered power as joint resistance changes. |
| Combo voltage | Monitors voltage and current and controls output according to the setpoints reached during the pulse. |
| Combo power | Monitors power and current and controls output according to the setpoints reached during the pulse. |
| Part Conditioning | Uses a first pulse to reach a set current before the enabled second pulse fires. If the current is not reached, the second pulse is skipped and an error is displayed. |
Dual pulse timing: Two pulses of 0.1 to 100 ms each; 0 to 100 ms upslope and downslope; 1 to 100 ms cool time between pulses; up to 600 ms total weld time in 0.01 ms steps.
Monitoring comes standard on every unit, helping operators check each weld against established process limits.
| Model / SKU | LDC6000-A / 302040 |
|---|---|
| Technology | Linear DC resistance welding with closed-loop feedback |
| Output current | 5 to 6,000 A |
| Output voltage | 0.01 to 10 V |
| Output power | 1 W to 25 kW |
| Weld modes | Constant current, constant voltage, constant power, combo voltage, combo power, and Part Conditioning |
| Pulses | Dual pulse; 0.1 to 100 ms per pulse |
| Upslope / downslope | 0 to 100 ms each |
| Cool time | 1 to 100 ms |
| Maximum total weld time | 600 ms |
| Timing resolution | 0.01 ms |
| Squeeze and hold time | Squeeze up to 5,000ms; hold 0 to 1,000ms |
| Monitoring | Comparator limits, learned envelope, electrical part check, last-weld waveforms, and daily CSV weld history |
| Weld schedules | Thousands of lockable schedules; up to 128 selectable by PLC |
| Communications | Modbus TCP, RS-232, and 20-pin PLC I/O |
| Display | 10-inch HD touchscreen |
| Input power | 100 to 240 VAC, single phase; 960 W |
| Weld-ready delay | 50 to 2,000 ms after each weld |
| Dimensions (W × L × H) | 9.5 × 16.7 × 13.8 in (24.1 × 42.4 × 35.1 cm) |
| Weight | 50.3 lb (22.8 kg) |
| Warranty | 1 year |
| Included | Welder, safety guide, accessories, foot pedals, and cables. A weld head is included only if ordered as part of the configuration. |
| Sold separately | Weld heads, handpieces, electrodes, and attachments |
The Sunstone Linear DC is sold as a power supply. Select the weld head, electrodes, and accessories that fit your application.
It measures output during the pulse and adjusts it as part resistance changes, helping the welder hold the selected current, voltage, or power.
Yes. The unit includes PLC I/O, Modbus TCP, RS-232, a pneumatic valve drive, and an E-stop input. Up to 128 schedules can be selected by PLC.
This SKU includes just the welder / power supply. Weld heads, handpieces, electrodes, and attachments are sold separately unless included in a separately ordered configuration.
Yes. Send sample parts to Sunstone for a free micro weld evaluation to help determine the process and equipment that fit your application.
Ready to build your system? Add the Linear DC to your cart, request a quote, or send us sample parts for a free micro weld evaluation.
Sunstone ships welders all over the world every day. Kindly note that Duties and Taxes are not calculated nor collected by Sunstone on international orders. In most cases, the assigned carrier will notify you of any additional required fees. Thank you!